ZigDiggity version 2 is a major overhaul of the original package and aims to enable security auditors and developers to run complex interactions with ZigBee networks using a single device.
Using a default install of Raspbian, perform the following steps:
sudo raspbi-config
command
sudo GCFFlasher -f firmware/zigdiggity_raspbee.bin
sudo GCFFlasher -udo GCFFlasher -r
pip3 install -r requirements.txt
sudo cp patch/zigbee.py /usr/local/lib/python3.5/dist-packages/scapy/layers/zigbee.py
sudo apt-get install wireshark
The current version of ZigDiggity is solely designed for use with the Raspbee
Currently scripts are available in the root of the repository, they can all be run using Python3:
python3 listen.py -c 15
When running with wireshark, root privileges may be required.
ack_attack.py
- Performs the acknowledge attack against a given network.beacon.py
- Sends a single beacon and listens for a short time. Intended for finding which networks are near you.find_locks.py5
- Examines the network traffic on a channel to determine if device behavior looks like a lock. Displays which devices it thinks are locks.insecure_rejoin.py
- Runs an insecure rejoin attempt on the target network.listen.py
- Listens on a channel piping all output to wireshark for viewing.scan.py
- Moves between channels listening and piping the data to wireshark for viewing.unlock.py
- Attempts to unlock a target lockThe patterns used by ZigDiggity version 2 are designed to be as reliable as possible. The tool is still in fairly early stages of development, so expect to see improvements over time.
8240 S. Kyrene Rd.
Suite A113
Tempe, AZ
85284
United States